DMX512 addressable LED Flexbile Strip Light-5050 RGB-60led/m
深圳长信智汇科技有限公司 深圳长信智汇科技有限公司 深圳长信智汇科技有限公司 深圳长信智汇科技有限公司

Part No.: CIY-LS1113DMX

    1)- This a DMX512 Control Flexible LED Strip 

    2)- The whole strip had 10 Pixels which is 30CH DMX address in one meter@24VDC,20pixels which is  60CH DMX addres in one meter @12VDC
    3)- 60pcs supper bright Epistar SMD RGB LED

    4)- each 6 RGB LEDs  integrated 1 DMX  IC per segment, can be cutted per 6LED(0.1M)@24VDC;each 3 RGB LEDs integrated 1 DMX IC per segment,can be cutted 3LED(0.05m)@12VDC
    5)- each end of strip soldered 5 Poles twin-lead wires at 15cm length

    6)- non-waterproof led strips with 3M adhesive on back side for adhere;

         waterproof led strip with screw+silicon clip accessories, or 3M adhesive back side

    7)- Brand: CIY LED

    How to Connect & Operate ?

    The LED strip has to be addressed before connect to the DMX controller.

    There are 5 wires, ( DC24+,PI,A,B,GND).

    We have the controller which can set the address .


    The dc24v+ and GND connected to the power.

    DC+: connect to power supply DC+
    DMX+ (A): connect to controller DMX+ (A)
    DMX-  (B): connect to controller DMX- (B)
    GND: connect to power supply GND & controller GND

DMX512  Directly Control RGB LED Strip Features:
1. This strip is 24V 60 leds DMX512 LED Digital dream color strip ,not SPI-TTL led pixel strips. DMX512 led strips protocl is DMX512(1990) and dmx signal is parallel not series.
2. its advantage is parallel DMX512 signal could avoid LEDs color influenced by the failure of one light in serial connection.
2. Entire strip has 10 pixels ( 30 channels), 60 leds in a meter with 10mm width pcb board.
3. Communication between DMX512 led digital strips are synchronized perfectly under support of Artnet / DMX512 led controllers.
4. 24V 60 leds DMX512 LED Digital strip need to write DMX address code via DMX address coder / controller.
5. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.
6. 24V 60 leds DMX512 LED Digital strip flexible , bright, durable and easy for installation.
7.For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip, there shipped with flexible silicon brackets and screws,
the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.
8.Flexible PCB material , Black PCB and White PCB optional , Each LED/Pixel can be cut , there is cut lines every 100mm.
9. We commonly make it in 5meters per reel with a 5Pin JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
10. PCb 10mm width ,2ounces , 0.25mm thickness with 3M tape back side for non-weatherproof version . 12.5mm width , 4mm thickness with silicon tube for waterproof version.
Note: the blank with * must be filled in.
  • *Name:

  • Country:

  • Company:

  • Website:

  • *E-mail:

  • Phone:

  • Subject:

  • Content:


    Contact us

    Building A1,Huafengzhenbao lndustrial Park,Beihuan Road, Shiyan Town, Bao'an District,Shenzhen,China

    Zip code:518108

    Tel: +86 755 33101037

Copyright©2014 CIY LED LIMITED All Rights Reserved.